TRANTOR SYSTEMS, LTD.

T130

Data bus:                8-bit, ISA
Size:                    Half-length, full-height card
Hard drive supported:    Up to seven SCSI devices
Floppy drives supported: None

[Image]

                       CONNECTIONS

                Function                    Location

  DB25 SCSI connector - external               J1

  50-pin SCSI connector - internal             J2

  4-pin connector - Drive Activity LED         J4

               I/O PORT ADDRESS

    Address       SW1/switch 1   SW1/switch 2

      350h            off            off

      340h            off             on

      250h            on             off

      240h            on              on

                      BIOS ADDRESS - SW1

    Address      SW1/switch 3    SW1/switch 4    SW1/switch 5

    Disabled          off             off            off

     CA00h            off             off             on

     CE00h            off             on             off

     DA00h            off             on              on

     DE00h            on              off            off

    Reserved          on              off             on

    Reserved          on              on             off

    Reserved          on              on              on

                             INTERRUPT REQUEST

        IRQ            JP3/jumper 1      JP3/jumper 2      JP3/jumper 3

  »     Disabled           open              open              open

          IRQ3            closed             open              open

          IRQ5             open             cosed              open

          IRQ7             open              open             closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   BIOS enabled                      SW1/switch 6            off

      BIOS disabled                     SW1/switch 6            on

  »   Factory configured - do not       SW1/switch 7            off
      alter

  »   Factory configured - do not       SW1/switch 8            off
      alter

  »   Zero Wait State disabled               JP2               open

      Zero Wait State enabled                JP2              closed